FII-PRA040/80 RiscV Educational Platform is a ready-to-use development platform designed around the Field Programmable Gate Array (FPGA) from Intel Altera.
Offical Online Shopping Website link:
https://fpgamarketing.com/FII-PRA040-Altera-risc-v-Cyclone10-FPGA-Boards-FII-PRA040.htm
It was designed for use in all fields of FPGA development and experiments. FII-AC40/FII-AC80 is an incredibly flexible processing platform, capable of adapting to whatever your project requires.
Communication
Digital Communication
DSP(FPGA)
Network
100M/1G Interface,switch
VLAN
USB:
USB2.0 Engine Development
CPU:
RISC-V CPU 32bit Ecosystem Dvelopment and Educational Experiments
Artificial Intelligence
Voice collection, speech recognition
Image acquisition and image recognition, deep learning
Features
10CL040 | 10CL080 | |
Logic elements (LEs) (K) | 40 | 80 |
Memory blocks(9K) | 126 | 305 |
LMemory block(Kb) | 1134 | 2745 |
18×18 multipliers | 126 | 244 |
Phase-locked loop(PLL) | 4 | 4 |
Global clock networks | 20 | 20 |
System Features:
-
- Sram: IS61WV25616 (2 pieces ) 256K x 32bit
-
- Spi: serial flash (16M bytes)
System Connectivity
-
- 10/100/1000 Mbps Ethernet
- Hdmi: Hdmi out (1920×1080@60Hz)
-
- USB to Serial Interface:USB-UART bridge
Interaction and Sensory Devices
-
- 8 Switches
-
- 7 Buttons (up , down, left, right, ok, menu, return)
-
- 1 Reset button
-
- 8 LEDs
-
- 1 4-digit 7 segment display
-
- 1 I2c interface (24c02 eeprom)
-
- High resolution graphic LCD interface
-
- Image input interface
Expansion Connectors
-
- 4 gpio connectors (compatible with digilent Pmod)
Features and Benefits
-
- gpio (16 ) 2×8 standard 2.54mm connectors (pin)
-
- led outport (8 个) 0603 smd
-
- switch (8 in one group) smd
- 7 Buttons (up , down, left, right, ok, menu, return)
-
- i2c 24c02 smd soic
-
- spi flash MX25L6433F 8-SOP (8M bytes)
-
- usb2uart ft2232C/H (2 uart ) Or cp2102 (1 uart)
-
- jtag 2×5 standard 2.54mm connectors(pin)
-
- eth 1G CAT5 Ethernet (rtl8111e)
-
- Digital tube 7seg (4) oasistek TOF-5421BMRL-N
-
- Hdmi out adv7511, hdmi_adv7511.SchDoc
-
- Test Port: 1×6 Standard 2.54mm connector (pin)
Attention:
-
- The Pins must be connectted by above picture, and you cannot change the sequence
- TEST_3V3_PIN* must be 3.3V gpio
- Power supply adpter: 5.3V adapter 2.6A 5mm X 2.5mm Interface jack
- Power module: RT8068, RT8088, etc (for 1.2v, 1.8v, 2.5v, 3.3v )
- Size : 21.4cm x 14 cm (Half A4 )


